[摘要]新疆松土器租赁厂家液压锤与挖掘机连接方法。液压锤通过分流阀与挖掘机连接。分流阀有4个油口，每个油口都有相应的标识，分别为“p”、“a”、“h”和“t”口。现将yc260、yc460、 yc750液压锤同相应挖掘机上分流阀的连接方法介绍如下。
液压锤与挖掘机连接方法。液压锤通过分流阀与挖掘机连接。分流阀有4个油口，每个油口都有相应的标识，分别为“p”、“a”、“h”和“t”口。现将yc260、yc460、 yc750液压锤同相应挖掘机上分流阀的连接方法介绍如下。
Hydraulic hammer are connected through a shunt valve and excavator. Shunt valve has 4 oil outlet, a corresponding identification are each oil outlet, are "P", "a", "H" and "t" export. The connection method of YC260, yc460, yc750 hydraulic hammer with corresponding excavator shunt valve is introduced as follows.
(1）将分流阀的“p”口与泵的出油口用软管连接起来。
(1) the shunt valve "P" port and an oil outlet of the pump is connected with the hose.
(2）将分流阀的“a”口与操纵阀的进油口用软管连接起来。
(2) the shunt valve "a" port and the control valve oil inlet hose connection.
(3）将分流阀的“h”口接通于液压锤进油管路上。
(3) the shunt valve "H" port is connected to the oil inlet pipe of hydraulic hammer.
(4）将分流阀的“t”口与油箱连接起来。
(4) the shunt valve "t" port connected with the oil tank.
(5）将液压锤的回油管连接在挖掘机的主回油管路上。
(5) will return pipe connected to the main return pipe on the road of excavator hydraulic hammer.
(6）连接各接口的管路通径为：当主机供油量小于70l/min时，管路通径为￠16mm；当主机供油量大于或等于70l/min时，管路通径 为￠20mm。
(6) diameter pipeline connecting the interface: when the host oil quantity is less than 70l/min, pipe diameter is Phi 16mm; when the engine oil quantity is greater than or equal to 70l/min, pipe diameter is phi 20mm.
与就找新疆信合工程机械租赁，我们以效益为中心，秉承诚信做人、踏实做事的优良传统，以体制创新为平台，走专业化、合作化的经营道路，谋求企业经济效益和社会效益的双重最大化。